Furnace filter · 1-inch
3M Filtrete MPR 1900 (Premium Allergen)
A 1-inch pleated filter that leads with '1900 MPR' - a 3M-only scale. The true rating is MERV 13, and in a 1-inch panel that high MERV also restricts airflow.
Total cost of ownership
Checked yesterday- Per filter
- $20.00
- Replaced
- 4x/yr
- Annual cost
- $80/yr
Certifications
No third-party certification on an official database. Any performance claims are unverified.
Overview
The 3M Filtrete MPR 1900 (Premium Allergen) is a 1-inch panel furnace filter rated MERV 13 on the standardized ANSI/ASHRAE 52.2 scale, which captures fine particles including smoke and many bacteria-size particles. It markets a proprietary MPR 1900 rating but also prints the true MERV. Because it is high MERV in a thin 1-inch panel, it also restricts airflow more than the same MERV in deep media - worth checking against your system's static-pressure tolerance. Replaced about 4 times a year, it runs roughly $80 per year.
By the numbers
- True MERV (ASHRAE 52.2)
- MERV 13
- Proprietary rating
- MPR 1900 (MERV also shown)
- Depth
- 1 inch (panel)
- Captures
- fine particles including smoke and many bacteria-size particles
- Replacement cadence
- 4x per year
- Per-filter price
- $20.00
- Annual filter cost
- $80/yr
- Rating standard
- self-rated to ASHRAE 52.2 (not AHRI-certified)
Strengths
- No standout strengths in our scoring.
Watch-outs
- - Total Cost of Ownership: 0.0/10
- - Airflow Fit: 0.0/10
- - Practical Fit: 2.0/10
Who it is for
- · Homes targeting smoke, allergens, or fine particles (MERV 13)
Who should skip it
- · Older or low-static systems - a 1-inch MERV 13 can restrict airflow
How it scored
Verified Filtration
7.0/10 · 30%True ANSI/ASHRAE 52.2 MERV - the only standardized filtration rating. Higher MERV captures finer particles.
- +7MERV 13 or higher AMERV 13 - Captures fine particles including smoke and many bacteria-size particles (MERV 13+).
Total Cost of Ownership
0.0/10 · 25%Computed annual filter cost vs the depth-class median. Cheap 1-inch filters replaced often can cost more than deep media.
- 0Annual filter cost vs class median A$80.00/yr (above class median (expensive to run)) - Computed annual filter cost (price x replacements per year) scored against the depth-class median.
Rating Honesty
5.0/10 · 20%Does the brand print the true MERV, or hide it behind a proprietary MPR/FPR scale? MPR/FPR is not MERV.
- +5Prints true MERV but markets a proprietary scale AMPR 1900 shown with MERV - Prints the real MERV but leads with a proprietary MPR/FPR number, which is not a standardized rating.
Airflow Fit
0.0/10 · 15%Depth vs MERV. A high-MERV 1-inch filter restricts airflow and can strain the blower; deep media at the same MERV does not.
- ·High MERV in a thin panel BMERV 13 in 1" panel - A high-MERV 1-inch filter has limited surface area and can restrict airflow enough to strain some blowers. Check your system's static-pressure tolerance.
- ·Pressure drop not published Cno initial-resistance figure - The manufacturer publishes no initial-resistance figure; airflow impact is inferred from depth and MERV.
Practical Fit
2.0/10 · 10%Replacement cadence and reusability. Frequent swaps are a maintenance and cost burden.
- +2Frequent replacement B4x per year - Needs replacing every 1-3 months, a recurring cost and chore.
Related guides
This score is our opinion under our published rubric, not a statement of objective fact or a lab test of this product. We score what third-party certifications prove; absence of a certification means we found no verification, not that a product fails to perform. Last reviewed 2026-06-01. Scored under hvac-v1.0. Prices were last checked yesterday; the freshness chip above the cost panel shows the current state. See the methodology for how each rule fires.